[Ncep.list.emc.glopara-support] parallel run on vapor

[Kate Howard]

Sim,

I looked through the analysis dayfile and see a number of mismatches due to
the use of an old configuration file. Your run was pointing to older
versions of the exglobal_analysis script in Moorthi's directories and some
other scripts in my personal directories, neither of which are maintained
to match production.

Daryl Kleist suggested there is a mismatch between the namelists in
gsiparm.anl (/stmp/mgd0sa/para/nodrop2011062206gfsanal/gsiparm.anl) and the
namelist setting in gsimod.F90
(/mtb/save/glopara/trunk/para/sorc/global_gsi.fd/gsimod.F90).

If you do a diff on the current exglobal_analysis script and the one set in
your configuration file you will see a number of differences, several
having to do with the namelist, as well as other outdated files/settings:

diff
/mtb/save/wx23sm/para_scripts/cver_1.1/scripts/exglobal_analysis.sh.sms
/mtb/save/glopara/trunk/para/scripts/exglobal_analysis.sh.sms

Again, I suggest trying your run again with the updated configuration file
and let me know if the same issue occurs.

Thank you Daryl for helping me pin down the namelist differences.

Kate Howard
NCEP/EMC Global Branch
GFS POC / Monsoon Desk



On Tue, Dec 20, 2011 at 11:00 AM, Kate Howard <kate.howard at noaa.gov> wrote:

> Sim,
>
> I see you are using an old configuration file. Also, the analysis step is
> complaining because it can't find several of the sfcf and sigf files from
> the previous cycle.
>
> To make sure it isn't the config file please grab a copy of the newest one
> and try your run again:
>
> /mtb/save/glopara/trunk/para/exp/para_config_gfs
> /mtb/save/glopara/trunk/para/exp/para_config_gfs_prod (matches production)
>
> The older configuration file is using several older versions of pmkr and
> other scripts/code.
>
> Do you only want 3 hrly output from the gdas runs? I suggest leaving it at
> one hourly output for the gdas (default in new config files).
>
> Let me know if the analysis step fails again and I'll take another look.
>
>
> Kate Howard
> NCEP/EMC Global Branch
> GFS POC / Monsoon Desk
>
>
>
> On Tue, Dec 20, 2011 at 10:34 AM, sim.aberson <sim.aberson at noaa.gov>wrote:
>
>> I am trying to perform a parallel run on vapor.  This is the first time I
>> am using the current version of the model system, so some things have
>> changed since I have done this last.  I have successfully gotten through a
>> few steps, but my anal steps are bombing.  I get
>>
>>   0:     PROGRAM GSI_ANL HAS BEGUN. COMPILED 1999232.55     ORG: NP23
>>   0:     STARTING DATE-TIME  DEC 19,2011  18:48:22.813  353  MON   2455915
>>   0:
>>   0:
>>  164:"gsimod.F90", line 638: 1525-001 The READ statement on the file
>> (standard input) cannot be completed because the end of the file was
>> reached.  The program will stop.
>>  165:"gsimod.F90", line 638: 1525-001 The READ statement on the file
>> (standard input) cannot be completed because the end of the file was
>> reached.  The program will stop.
>>
>> But this doesn't exactly give me all the information I need to debug
>> this.  Any help is appreciated.
>>
>> My output appears in /gpfs/v/scratch/ptmp/mgd0sa/**rotdatprx.  The
>> particular dayfile with that error is nodrop2011062206gfsanal.**dayfile
>> in that directory, and the gdasanal step likewise failed.  My config file
>> is at /gpfs/v/mtb/save/mgd0sa/para/**prx.config.
>>
>> Thanks,
>> Sim
>>
>> --
>> Sim Aberson         AOML/Hurricane Research Division          Miami, FL
>>    "Hurricane states erect statues in my honor." -- David Sedaris
>> ______________________________**_________________
>> Ncep.list.emc.glopara-support mailing list
>> Ncep.list.emc.glopara-support@**noaa.gov<Ncep.list.emc.glopara-support at noaa.gov>
>> https://lstsrv.ncep.noaa.gov/**mailman/listinfo/ncep.list.**
>> emc.glopara-support<https://lstsrv.ncep.noaa.gov/mailman/listinfo/ncep.list.emc.glopara-support>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lstsrv.ncep.noaa.gov/pipermail/ncep.list.emc.glopara-support/attachments/20111220/689491a6/attachment-0001.html