[Ncep.list.emc.glopara-support] Parallel cycle on vapor

[Diane Stokes]

Sim,

Specfically, comment out this line in your rlist:
   */gdas/anal/ROTO        =       satang.$CDUMP.$CDATE

That should get you going again.  Your analysis job worked, so you can 
submit the next job in the sequence:
    2010082906 gdas angu

In the meantime, we'll sort out why your rlist was not generated 
correctly.  (This did come up before and I thought the issue had been 
resolved).

    Diane



On 10/20/2010 10:35 AM, Daryl Kleist wrote:
> Su just recently ran into a similar problem with a run on cirrus/stratus.
>
> Without looking, I suspect the issue is actually a conflict between the
> rlist being used (if it was generated automatically using the defaults)
> and the new scripts that have broken up the angle update and GSI parts
> of the analysis script (putting the angle update into its own scripts).
> The rlist probably still has "satang.$dump.$adate" as an expected output
> from the analysis script, where it is actually now output from the
> "angu" job. This is a pretty easy fix (a few lines need to be modified
> in the rlist).
>
> Also, this is a good chance to point out that the default rlist that is
> generated (if the one assumed isn't found) should be modified to be
> consistent with the new scripting.
>
> Daryl
>
>
> sim.aberson wrote:
>> I am continuing to run a parallel cycle on vapor and have encountered
>> another problem that is past my knowledge. My 2010082906 gdas anal
>> step is bombing. Output is in
>> /ptmp/mgd0sa/rotdatprx/nodrop2010082906gdasanal.dayfile. It looks like
>> the global_gsi is running fine (exit value is 0, exited: rc=0 for all
>> tasks, and ERR=0). After that, it gets murky. All I can find in that
>> dayfile is that some files it is trying to copy to get ready for the
>> fcst step aren't there:
>>
>> + /u/wx20mi/bin/ncpx -p
>> /stmp/mgd0sa/para/nodrop2010082906gdasanal/satcnt.gdas.2
>> 010082906 /ptmp/mgd0sa/rotdatprx
>> cp -p
>> /stmp/mgd0sa/para/nodrop2010082906gdasanal/satcnt.gdas.2010082906
>> /ptmp/mg
>> d0sa/rotdatprx
>> cp: /stmp/mgd0sa/para/nodrop2010082906gdasanal/satcnt.gdas.2010082906:
>> A file or
>> directory in the path name does not exist.
>> + [[ 1 = 0 ]]
>> + echo pcop: satcnt.gdas.2010082906 not found in
>> /stmp/mgd0sa/para/nodrop2010082
>> 906gdasanal
>> + 1>& 2
>> pcop: satcnt.gdas.2010082906 not found in
>> /stmp/mgd0sa/para/nodrop2010082906gdas
>> anal
>> + (( rc+=ra ))
>> + exit 12
>> + exit 12
>> + [[ 1 -ne 0 ]]
>> + /mtb/save/wx23sm/para_scripts/cver_1.1/bin/perr
>> + GROUP=mtb
>> + NCP=/u/wx20mi/bin/ncpx
>> + SUB=/u/wx23sm/bin/sub_vapor
>> + PLOG=/mtb/save/wx23sm/para_scripts/cver_1.1/bin/plog
>> + PSUB=/mtb/save/wx23sm/para_scripts/cver_1.1/bin/psub_angu
>> + [[ -n ]]
>> + export COMDAY=/ptmp/mgd0sa/rotdatprx
>> + export RESUBMIT=YES
>> + jn=nodrop2010082906gdasanal
>> + grep nodrop2010082906gdasanal failed
>> /mtb/save/mgd0sa/para/prnodrop.runlog
>> + /mtb/save/wx23sm/para_scripts/cver_1.1/bin/plog
>> /mtb/save/mgd0sa/para/prnodrop
>> .runlog ERROR nodrop2010082906gdasanal failed
>>
>>
>> Something else may be going on, but I have spent quite a bit of time
>> looking. Any ideas on how to fix this?
>>
>> Thanks,
>> Sim
>>
>>
> _______________________________________________
> Ncep.list.emc.glopara-support mailing list
> Ncep.list.emc.glopara-support at noaa.gov
> https://lstsrv.ncep.noaa.gov/mailman/listinfo/ncep.list.emc.glopara-support