[Ncep.list.wwatch3.discussion-group] WWIII Notes - Weds, Aug 15, 2018
Jessica Meixner - NOAA Federal
jessica.meixner at noaa.gov
Thu Aug 16 13:23:34 UTC 2018
Hi -
Here is the link to the NCEP page where technical notes (many of them on
waves) are: http://polar.ncep.noaa.gov/mmab/notes.shtml
Best,
Jessica
On Thu, Aug 16, 2018 at 12:58 PM, Jessica Meixner - NOAA Federal <
jessica.meixner at noaa.gov> wrote:
> Hi Everyone,
>
>
> Thanks to those of you who joined us. It looks like we are still on track
> for an October public release. The status of the milestone projects (
> https://vlab.ncep.noaa.gov/redmine/projects/emc-ww3/roadmap) are:
>
> -
>
> 6.XX Namelist for remaining programs (no update, a few more programs
> to go)
> -
>
> 6.XX Bit reproducibility: The NCEP operational system with the grid
> redesign no longer has bit reproducibility as an issue. However, when
> having two grids of equal rank partitioning the MPI to run them is still an
> unresolved issue. In addition we still have several regression tests that
> are not bit-reproducible (See list of them here:
> https://vlab.ncep.noaa.gov/redmine/projects/emc-ww3/wiki/
> How_to_use_matrixcomp_to_compare_regtests_with_master#5-Look-at-results
> <https://vlab.ncep.noaa.gov/redmine/projects/emc-ww3/wiki/How_to_use_matrixcomp_to_compare_regtests_with_master#5-Look-at-results>
> )
> -
>
> 6.XX Memory management: no update
> -
>
> 6.XX IC5: Update from Qingxiang: IC5 is ready to be merged back to
> master, ST6 updates soon after.
> -
>
> 6.XX Directional Singularity at NPole: works in serial, having MPI
> issues
> -
>
> 6.XX BT Output: Update from Qingxiang: work will start soon on this
> -
>
> 6.XX GFDL FMS coupling (Waiting on Directional singularity)
> -
>
> 6.XX Bug Fixes and Documentation
> -
>
> Ugdev2bugfixes just went back into the master.
> -
>
> Fabrice has bug fix for W3SBS1MD
> -
>
> Mickael has many bug fixes and small updates which will be merged
> back in September.
> -
>
> UKMet has some updates for SMC grid with netcdf which will be ready
> soon.
> -
>
> Stefan wants to add some output parameters (might not be ready for
> public release)
> -
>
> There are 50 open bug fixes and documentation issues
> <https://vlab.ncep.noaa.gov/redmine/projects/emc-ww3/issues?utf8=%E2%9C%93&set_filter=1&f%5B%5D=status_id&op%5Bstatus_id%5D=o&f%5B%5D=fixed_version_id&op%5Bfixed_version_id%5D=%3D&v%5Bfixed_version_id%5D%5B%5D=1380&f%5B%5D=&c%5B%5D=tracker&c%5B%5D=status&c%5B%5D=priority&c%5B%5D=subject&c%5B%5D=assigned_to&c%5B%5D=updated_on&group_by=&t%5B%5D=>.
>
> -
>
> You can see what open tickets you have by going to:
> https://vlab.ncep.noaa.gov/redmine/projects/emc-ww3/
> issues?query_id=259
> <https://vlab.ncep.noaa.gov/redmine/projects/emc-ww3/issues?query_id=259>
>
>
> Some other issues that were discussed is an overall potential problem of
> uninitialized variables and arrays. We might need to systematically
> address this as a wider group, but please keep your eye out for them and we
> can fix as we find them. While some are never used before being set to a
> value, it is possible this is part of the bit reproducibility issues we are
> seeing for regression tests.
>
> Another issue that was discussed is the manual. In general, it’s time for
> manual and documentation updates for the public release. In addition,
> there are several sections that could use attention and updates. Two in
> particular:
>
> -
>
> The timestepping section is out of date and could use improvement. We
> should give examples of time-stepped used in operations and expand on the
> discussion of why we might say “do as we say not as we do” (as it’s
> currently written). NCEP technical note 259 (
> http://polar.ncep.noaa.gov/mmab/papers/tn259/mmab259.pdf
> <http://polar.ncep.noaa.gov/mmab/papers/tn259/mmab259.pdf>) has
> equations to determine timesteps and that would be useful to include in the
> manual. https://vlab.ncep.noaa.gov/redmine/issues/52842
> -
>
> Another point that was brought up is to update the output parameter
> definitions, making sure they are consistent with what is actually
> calculated in the code. In addition, possibly just presented in a easier
> to find & use way for new users. (Issues: https://vlab.ncep.noaa.gov/
> redmine/issues/54027, https://vlab.ncep.noaa.gov/redmine/issues/54013)
>
>
> Lastly, there is a desire for being able to choose the output parameters
> calculated for point output instead of being limited to the different table
> options. Currently, this is not being planned for the upcoming public
> release.
>
> Last, a few GIT reminders
>
> -
>
> Please do not put netcdf or any other binary file in the repo. Also
> please try to keep large files in general out of the repo. If you have a
> large regression test file, we will add it to the ftp instead.
> -
>
> Please use remote branches instead of pushing directly to the master
> unless your update is super small. It’s easier to run the regression tests
> and make updates on a remote branch than if you push directly to
> code-review. It will also help with timing as many of you might all be
> pushing to the master at the same time.
> -
>
> Checklist for submitting to master: https://vlab.ncep.noaa.gov/
> redmine/projects/emc-ww3/wiki/Checklist_for_submitting_to_master
> <https://vlab.ncep.noaa.gov/redmine/projects/emc-ww3/wiki/Checklist_for_submitting_to_master>
>
>
>
> If you have any presentations for the group this fall please let me know.
> Our next meeting will be Wednesday, September 19th.
>
> Best,
>
> Jessica
>
>
> --
> Jessica Meixner
> NCEP/EMC
> NOAA Center for Weather and Climate Prediction
>
--
Jessica Meixner
NCEP/EMC
NOAA Center for Weather and Climate Prediction
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.lstsrv.ncep.noaa.gov/pipermail/ncep.list.wwatch3.discussion-group/attachments/20180816/ae835461/attachment-0001.html
More information about the Ncep.list.wwatch3.discussion-group
mailing list