[Ncep.list.nos-nowcoast-status] NOAA/NOS nowCOAST STATUS MESSAGE - Info regarding upcoming new nowCOAST version

NOAA/NOS nowCOAST Status Message Mailing List ncep.list.nos-nowcoast-status at lstsrv.ncep.noaa.gov
Fri Aug 24 19:21:10 UTC 2018


NOAA/NOS nowCOAST STATUS MESSAGE
3:15 PM EDT Fri Aug 24 2018

We anticipate by  late September 2018 that a new version of nowCOAST will
be implemented operationally.  The new nowCOAST version (V5.2) will feature
the following changes


   - New map service to provide maps of oceanographic forecast guidance
   from the NOS 3-D operational forecast system for the Gulf of Maine (GoMOFS)
   - New map service to provide maps of NOS forecast guidance of the marine
   pathogen, Vibrio Vulnificus (Vv) for the Chesapeake Bay
   - Incorporation of water level forecast guidance from NOS Extratropical
   Surge and Tide Operational Forecast System (ESTOFS) for Micronesia into the
   existing ESTOFS map service
   - Ability to display NHC Potential Storm Surge Flooding Maps for
   multiple tropical cyclones at the same time
   - Incorporation of NWS/CPHC’s new Best Track information for tropical
   cyclones over the Central Pacific Ocean into the existing tropical cyclone
   track and intensity forecasts map service
   - Addition of a new data layer for NWS/NHC’s and CPHC’s initial wind
   radii for tropical cyclones over the Atlantic, Eastern North Pacific, and
   Central Pacific Oceans into the tropical cyclone track and intensity
   forecasts map service
   - Addition of three new data layers for NWS Snow Squall Warning, Dust
   Storm Warning, and Dust Storm Advisory into the short-duration hazards map
   service
   - Discontinuation of legacy time-offset or forecast projection based map
   services for NOS 3-D operational oceanographic forecast systems and
   NWS/NCEP Global Real-Time Ocean Forecast System
   - Addition of Canada Marine Zones as a new layer in the
forecast_meteoceanhydro_pts_zones_geolinks
   map service depicting Canada’s marine zone boundaries along with hyperlinks
   to the corresponding marine text forecast webpages
   - Modification of the mapoverlays_admin_fedgov map service to include
   the latest National Airspace System (NAS) Air Route Traffic Control Center
   (ARTCC) High and Low boundaries as separate layers
   - Discontinuation and removal of the Wind Profilers geo-referenced
   hyperlinks layer from the obs_meteoceanhydro_remote_pts_areas_geolinks map
   service
   - Update geo-referenced hyperlinks to observations and forecasts to
   correct URLs or remove dead links

---------------------------------------------------------------------------------------------------------------------------------
*Details including what users may have to change in their applications.*

The names of the new time-enabled map services for GoMOFS and Vv Marine
Pathogen forecast guidance are the following:

guidance_model_coastalocean_gomofs_time

guidance_model_coastalocean_pathogen_time



Information about these two new services will be available after the new
version is implemented in mid to late September at the following URLs:

https://nowcoast.noaa.gov/arcgis/rest/services/nowcoast/guidance_model_coastalocean_gomofs_time/MapServer



https://nowcoast.noaa.gov/arcgis/rest/services/nowcoast/guidance_model_coastalocean_pathogen_time/MapServer





The following actions need to be taken by users of the legacy time-offsets
map services of oceanographic forecast model guidance:

Name of Map Services:

guidance_model_coastalocean_cbofs_offsets

guidance_model_coastalocean_creofs_offsets

guidance_model_coastalocean_dbofs_offsets

guidance_model_coastalocean_ngofs_offsets

guidance_model_coastalocean_nyofs_offsets

guidance_model_coastalocean_sfofs_offsets

guidance_model_coastalocean_sjrofs_offsets

guidance_model_coastalocean_tbofs_offsets

guidance_model_coastalocean_leofs_offsets

guidance_model_coastalocean_lhofs_offsets

guidance_model_coastalocean_lmofs_offsets

guidance_model_coastalocean_loofs_offsets

guidance_model_coastalocean_lsofs_offsets

guidance_model_coastalocean_grtofs_offsets

Summary of Change:  Fourteen legacy time-offsets (projection hour) map
services providing maps of forecast guidance from NOS’ 3-d oceanographic
forecast modeling systems and also NWS/NCEP Global Real-Time Ocean Forecast
System (GRTOFS) will be decommissioned.  These map services, designed to
mimic the previous version of nowCOAST’s legacy map service configuration,
were created when nowCOAST became operational on the NOAA IDP
infrastructure in 2015 in order to provide time for users to transition to
the corresponding time-enabled map service for each of these NOS and NWS
forecast systems.  Users can still use OGC WMS or GeoServices REST
protocols to obtain the same maps from the time-enabled map services;
instead of specifying a target layer for each forecast to be viewed, users
must instead provide both a target layer identifier and a desired time
value in their requests.

Users need to modify their applications before mid to late September to use
corresponding time-enabled map services (e.g.
guidance_model_coastalocean_dbofs_time).  Detailed information on how to do
this can be found at
https://nowcoast.noaa.gov/help/#!section=time-enabled-map-services.



The following actions need to be taken by users of the short-duration
hazards warning map service:

Name of Map Service:  wwa_meteoceanhydro_shortduration_hazards_warnings_time

Summary of Change:  Three new warning layers will be added to this service
- *Snow Squall Warning*, *Dust Storm Warning*, and *Dust Advisory*.  Users
of the REST service endpoint can continue using their existing
configurations, but will need to update their clients if they wish to
access the three new layers.  Users of the WMS endpoint will be required to
update the configuration of any existing clients after the change is made,
as the WMS layer identifiers of all existing layers will be changing.

After the change, the layer configuration will be as follows:

Special Marine Warning:  REST id = 0, WMS id = 7

Tornado Warning:  REST id = 1, WMS id = 6

Extreme Wind Warning (Associated with Major Hurricane):  REST id = 2, WMS
id = 5

Severe Thunderstorm Warning:  REST id = 3, WMS id = 4

Flash Flood Warning:  REST id = 4, WMS id = 3

Snow Squall Warning:  REST id = 5, WMS id = 2

Dust Storm Warning:  REST id = 6, WMS id = 1

Dust Advisory:  REST id = 7, WMS id = 0





The following actions need to be taken by users of the tropical cyclone
track and forecast intensity track forecasts map service:

Name of Map Service:
wwa_meteocean_tropicalcyclones_trackintensityfcsts_time

Summary of Change:  One new layer will be added to this map service - *Tropical
Cyclone Current Wind Extent*.  Due to this change, several of the
pre-existing layer identifiers for both the REST and WMS endpoints will be
changing.  Thus, users of both the REST and WMS service endpoints will need
to update their client application configurations to use the updated layer
identifiers to avoid experiencing unexpected results.

After the change, the layer configuration will be as follows:

Atlantic, Central Pacific and Eastern Pacific Ocean Regions (group layer):
REST id = 0, not present in WMS

    Tropical Cyclone Track and Intensity Forecasts (group layer):  REST id
= 1, not present in WMS

         Tropical Cyclone Watches and Warnings for Coast:  REST id = 2, WMS
id = 10

         Tropical Cyclone Center Position Forecasts:  REST id = 3, WMS id =
9

         Tropical Cyclone Track Line Forecasts:  REST id = 4, WMS id = 8

         Tropical Cyclone Current Wind Extent:  REST id = 5, WMS id = 7

         Tropical Cyclone Cone of Uncertainty for Track Forecasts:  REST id
= 6, WMS id = 6

    Tropical Cyclone Preliminary Best Track Analyses (group layer):  REST
id = 7, not present in WMS

         Tropical Cyclone Observed Center Positions:  REST id = 8, WMS id =
4

         Tropical Cyclone Observed Track Line:  REST id = 9, WMS id = 3

         Tropical Cyclone Observed Surface Wind Swath:  REST id = 10, WMS
id = 2





The following actions need to be taken by users of the Zone & Point
Forecast Geo-Referenced Hyperlinks map service:

Name of Map Service:  forecast_meteoceanhydro_pts_zones_geolinks

Summary of Change:  One new layer will be added to this service within
the *Marine
Weather Forecasts* group, titled *Canada Marine Zone Forecasts*.  Because
of this change, several layer identifiers will be changing, so users of
either the REST or WMS endpoint should review the revised service
configuration and make any required changes.

After the change, the layer configuration will be as follows:

    Air Quality Forecasts (group layer):  REST id = 0, not present in WMS
        Air Quality Index Forecasts:  REST id = 1, WMS id = 17
    Ecological Forecasts (group layer):  REST id = 2, not present in WMS
        Harmful Algae Bloom Forecasts:  REST id = 3, WMS id = 15
    River Forecasts (group layer):  REST id = 4, not present in WMS
        River Stage & Discharge Forecasts (AHPS):  REST id = 5, WMS id = 13
    Aviation Weather Forecasts (group layer):  REST id = 6, not present in
WMS
        Terminal Aerodrome Weather Forecasts (TAF):  REST id = 7, WMS id =
11
    Fire Weather Forecasts (group layer):  REST id = 8, not present in WMS
        Fire Weather Zone Forecasts:  REST id = 9, WMS id = 9
    Marine Weather Forecasts (group layer):  REST id = 10, not present in
WMS
        Surf Zone Forecasts:  REST id = 11, WMS id = 7
        Coastal Marine Zone Forecasts:  REST id = 12, WMS id = 6
        Offshore Marine Zone Forecasts:  REST id = 13, WMS id = 5
        High Seas Marine Zone Forecasts:  REST id = 14, WMS id = 4
        Canada Marine Zone Forecasts:  REST id =15 , WMS id = 3
    Weather Forecasts (group layer):  REST id = 16, not present in WMS
        Public Weather Zone Forecasts:  REST id = 17, WMS id = 1





The following actions need to be taken by users of the Map Overlays of
Federal Agencies Administrative Regions map service:

Name of Map Service:  mapoverlays_admin_fedgov

Summary of Change:  The existing Air Route Traffic Control Center (ARTCC)
boundaries layer has been split into two separate layers – one for ARTCC
High and another for ARTCC Low – and grouped together into a group
layer.  Because
of this change, several layer identifiers will be changing, so users of
either the REST or WMS endpoint should review the revised service
configuration and make any required changes.

After the change, the layer configuration will be as follows:

    NWS Tropical Cyclone Breakpoints:  REST id = 0, WMS id = 12
    NAS Air Route Traffic Control Center Boundaries (group layer):  REST id
= 1, not present in WMS
        NAS Air Route Traffic Control Center High Boundaries:  REST id = 2,
WMS id = 11
        NAS Air Route Traffic Control Center Low Boundaries:  REST id = 3,
WMS id = 10
    NWS Weather Forecast Office County Warning Area Boundaries:  REST id =
4, WMS id = 8
    NWS Administrative Region Boundaries:  REST id = 5, WMS id = 7
    NWS River Forecast Center Service Area Boundaries:  REST id = 6, WMS id
= 6
    USCG Administrative Region Boundaries (group layer):  REST id = 7, not
present in WMS
        USCG Sector Boundaries:  REST id = 8, WMS id = 5
        USCG District Boundaries:  REST id = 9, WMS id = 4
    USACE Administrative Region Boundaries (group layer):  REST id = 10,
not present in WMS
        USACE District Boundaries:  REST id = 11, WMS id = 2
        USACE Division Boundaries:  REST id = 12, WMS id = 1



The following actions need to be taken by users of the Geo-Referenced
Hyperlinks to Remotely-Sensed Observations map service:

Name of Map Service:  obs_meteoceanhydro_remote_pts_areas_geolinks

Summary of Change:  The Wind Profiler Observations layer has been
discontinued and removed from the service.  Because of this change, several
layer identifiers will be changing, so users of either the REST or WMS
endpoint should review the revised service configuration and make any
required changes.

After the change, the layer configuration will be as follows:

    Remotely-Sensed Weather Observations (group layer):  REST id = 0, not
present in WMS
        Web Cameras:  REST id = 1, WMS id = 2
        Weather Radar Reflectivities:  REST id = 2, WMS id = 1



After the implementation has been completed, please reference each
service's REST Service Description page, WMS GetCapabilities document, or
the following help pages to verify the new layer configurations:

REST Layer Identifier lookup:
https://nowcoast.noaa.gov/help/#!section=rest-layer-ids

WMS Layer Identifier lookup:
https://nowcoast.noaa.gov/help/#!section=wms-layer-ids



If you have technical questions concerning these changes, please contact
nowcoast.team at noaa.gov.


John G.W. Kelley, nowCOAST Project Manager

Jason Greenlaw, nowCOAST Lead Developer

Coastal Marine Modeling Branch

Coast Survey Development Laboratory

Office of Coast Survey

NOAA/National Ocean Service
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.lstsrv.ncep.noaa.gov/pipermail/ncep.list.nos-nowcoast-status/attachments/20180824/9ae778e6/attachment-0001.html 


More information about the Ncep.list.nos-nowcoast-status mailing list