[Ncep.list.fv3-announce] global-workflow: Upcoming updates to external GFS components for $COMPONENT subfolder change

Wed Aug 19 13:28:14 UTC 2020

All,

I left part of the fitdir path out of my original email to you all
("/batrun"). My bad! Please see this corrected directions for updating your
fitdir paths:

*Fit2Obs*
>
> Changes to the Fit2Obs branch are *NOT* backwards compatible Users will
> need to update their current config.vrfy $fitdir paths to the saved copy
> below if they have a pre-restructuring experiment on-going:
>
> *WCOSS/Hera:*
>
> Current version - getting updated:
> $BASE_GIT/verif/global/Fit2Obs/ncf-vqc/batrun
>
> Saved copy (change to this for $fitdir in config.vrfy):
> $BASE_GIT/verif/global/Fit2Obs/ncf-vqc*_preCOMPONENT*/batrun
>

Thanks!

Kate Friedman (formerly Howard)
NOAA/NWS/NCEP/EMC Engineering and Implementation Branch

On Wed, Aug 19, 2020 at 9:23 AM Kate Friedman - NOAA Federal <
Kate.Friedman at noaa.gov> wrote:

> All,
>
> On WCOSS/Hera/Orion we have a number of copies of the obsproc packages
> from various points in its development for v16 (see Hera listing below).
> The copies listed in red are the ones I will be updating and if you are
> using them you'll be moving to the copies in purple. *All other copies
> will remain unaffected until we clean up the on-disk v16 installs later
> this fall.*
>
> If you are at all unsure about whether you need to update your configs
> please feel free to point me to your $EXPDIR and I'm happy to check for you!
>
> -bash-4.2$ pwd
>> /scratch1/NCEPDEV/global/glopara/git/obsproc/gfsv16b
>>
>
>
>>
>> *drwxr-sr-x 10 glopara da 4096 Jun 12 04:25
>> obsproc_global.iss71402.supportGFSv16drwxr-sr-x 10 glopara da 4096 Jun 12
>> 04:25 obsproc_global.iss71402.supportGFSv16_preCOMPONENT*
>> drwxr-sr-x 10 glopara da 4096 Jun 12 04:25
>> obsproc_global.iss71402.supportGFSv16_update
>> drwxr-sr-x 10 glopara da 4096 Aug 12 18:13
>> obsproc_global.iss80677.supportGFSv16-atmos
>>
>
>
>> *drwxr-sr-x  7 glopara da 4096 Dec 11  2019
>> obsproc_prep.iss70457.netcdfhistory*
>> drwxr-sr-x  7 glopara da 4096 Aug 12 18:11
>> obsproc_prep.iss70457.netcdfhistory-atmos
>> drwxr-sr-x  7 glopara da 4096 Jun 12 04:45
>> obsproc_prep.iss70457.netcdfhistory_hdob
>> drwxr-sr-x  7 glopara da 4096 Aug  5 20:58
>> obsproc_prep.iss70457.netcdfhistory_new
>> drwxr-sr-x  7 glopara da 4096 Aug  5 20:55
>> obsproc_prep.iss70457.netcdfhistory_new_update
>> *drwxr-sr-x  7 glopara da 4096 Dec 11  2019
>> obsproc_prep.iss70457.netcdfhistory_preCOMPONENT*
>>
>
> Thanks!
>
> Kate Friedman (formerly Howard)
> NOAA/NWS/NCEP/EMC Engineering and Implementation Branch
>
>
> On Tue, Aug 18, 2020 at 2:20 PM Kate Friedman - NOAA Federal <
> Kate.Friedman at noaa.gov> wrote:
>
>> All,
>>
>> Folks currently running the GFSv16 system on WCOSS, Hera or Orion please
>> read the full email below! Small but important change is coming this Friday!
>>
>> Summary of email: *Users on WCOSS/Hera/Orion currently running the
>> GFSv16 system need to update their $HOMEobsproc_prep, $HOMEobsproc_network
>> and $fitdir paths (add  "_preCOMPONENT" to end of setting) in their
>> configs.* This addition changes the paths for the obsproc and fit2obs
>> pieces to point to saved copies of the current versions (see purple text
>> down below) ahead of those versions (see red text below) being *updated
>> this Friday* to incorporate changes for the new $COMPONENT subfolder.
>> Advise making this change before Friday; the "_preCOMPONENT" copies are in
>> place now.
>>
>> Full details: As part of the new $COMPONENT subfolder task we will be
>> updating the on-disk installs of the following pieces on WCOSS, Hera and
>> Orion:
>>
>>    1. obsproc_prep
>>    2. obsproc_global
>>    3. Fit2Obs
>>    4. ens_tracker
>>
>> For #4...a new version of the tracker will be installed that is a
>> different version (v1.1.15.3) than what folks are currently using so this
>> install will not impact users running the pre-restructured system.
>>
>> For #1, #2 and #3...the current versions will need to be replaced with
>> their updated versions (same release branches, same path). Here is info on
>> each piece getting updated and what you need to know/do if you are running
>> the pre-restructured system and need to complete an experiment with it:
>>
>>    1. *obsproc_prep*
>>
>>    The change for $COMPONENT in the obsproc_prep branch is backwards
>>    compatible (yay!). Users don't *need* to change anything for this but
>>    out of an abundance of caution I have saved a copy of it. The current
>>    version will be getting updated this Friday.
>>
>>    Current version - getting updated:
>>    $BASE_GIT/obsproc/gfsv16b/obsproc_prep.iss70457.netcdfhistory
>>
>>    Saved copy (change to this for $HOMEobsproc_prep in config.base):
>>    $BASE_GIT/obsproc/gfsv16b/
>>    *obsproc_prep.iss70457.netcdfhistory_preCOMPONENT*
>>
>>    2. *obsproc_global*
>>
>>    The change for $COMPONENT in the obsproc_global branch is *NOT*
>>    backwards compatible. Users will need to update their current config.base
>>    $HOMEobsproc_network paths to the saved copy if they have a
>>    pre-restructuring experiment on-going:
>>
>>    Current version - getting updated:
>>    $BASE_GIT/obsproc/gfsv16b/obsproc_global.iss71402.supportGFSv16
>>
>>    Saved copy (change to this for $HOMEobsproc_prep in config.base):
>>    $BASE_GIT/obsproc/gfsv16b/
>>    *obsproc_global.iss71402.supportGFSv16_preCOMPONENT*
>>
>>    3. *Fit2Obs*
>>
>>    Changes to the Fit2Obs branch are *NOT* backwards compatible Users
>>    will need to update their current config.vrfy $fitdir paths to the saved
>>    copy below if they have a pre-restructuring experiment on-going:
>>
>>    *WCOSS/Hera:*
>>
>>    Current version - getting updated:
>>    $BASE_GIT/verif/global/Fit2Obs/ncf-vqc
>>
>>    Saved copy (change to this for $fitdir in config.vrfy):
>>    $BASE_GIT/verif/global/Fit2Obs/*ncf-vqc_preCOMPONENT*
>>
>>    *Orion:*
>>
>>    Not yet installed on Orion. Will be installed and tested with
>>    post-restructuring test of port2orion.
>>
>>
>> *The current versions listed above will be getting updated this Friday,
>> August 21st. Please update your config.base and config.vrfy before then!
>> You essentially just need to add "_preCOMPONENT" to the paths for
>> $HOMEobsproc_prep, $HOMEobsproc_network, and $fitdir. *
>>
>> Please let me know if you have any questions about the above and if you
>> encounter any issues after moving to the _preCOMPONENT copies. I will be
>> sending reminder emails about the updates related to the $COMPONENT
>> subfolder change ahead of and after the current on-disk copies get updated.
>>
>> Thanks all!
>>
>> Kate Friedman (formerly Howard)
>> NOAA/NWS/NCEP/EMC Engineering and Implementation Branch
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.lstsrv.ncep.noaa.gov/pipermail/ncep.list.fv3-announce/attachments/20200819/32b187eb/attachment-0001.html>