[Ncep.list.emc.glopara-support] Parallel cycle on vapor

Daryl Kleist daryl.kleist at noaa.gov
Wed Oct 20 10:35:27 EDT 2010


Su just recently ran into a similar problem with a run on cirrus/stratus.

Without looking, I suspect the issue is actually a conflict between the 
rlist being used (if it was generated automatically using the defaults) 
and the new scripts that have broken up the angle update and GSI parts 
of the analysis script (putting the angle update into its own scripts).  
The rlist probably still has "satang.$dump.$adate" as an expected output 
from the analysis script, where it is actually now output from the 
"angu" job.  This is a pretty easy fix (a few lines need to be modified 
in the rlist).

Also, this is a good chance to point out that the default rlist that is 
generated (if the one assumed isn't found) should be modified to be 
consistent with the new scripting.

Daryl


sim.aberson wrote:
>  I am continuing to run a parallel cycle on vapor and have encountered 
> another problem that is past my knowledge.  My 2010082906 gdas anal 
> step is bombing.  Output is in
> /ptmp/mgd0sa/rotdatprx/nodrop2010082906gdasanal.dayfile.  It looks 
> like the global_gsi is running fine (exit value is 0, exited: rc=0 for 
> all tasks, and ERR=0).  After that, it gets murky.  All I can find in 
> that dayfile is that some files it is trying to copy to get ready for 
> the fcst step aren't there:
>
> + /u/wx20mi/bin/ncpx -p 
> /stmp/mgd0sa/para/nodrop2010082906gdasanal/satcnt.gdas.2
> 010082906 /ptmp/mgd0sa/rotdatprx
> cp -p 
> /stmp/mgd0sa/para/nodrop2010082906gdasanal/satcnt.gdas.2010082906 
> /ptmp/mg
> d0sa/rotdatprx
> cp: /stmp/mgd0sa/para/nodrop2010082906gdasanal/satcnt.gdas.2010082906: 
> A file or
>  directory in the path name does not exist.
> + [[ 1 = 0 ]]
> + echo pcop: satcnt.gdas.2010082906 not found in 
> /stmp/mgd0sa/para/nodrop2010082
> 906gdasanal
> + 1>& 2
> pcop: satcnt.gdas.2010082906 not found in 
> /stmp/mgd0sa/para/nodrop2010082906gdas
> anal
> + (( rc+=ra ))
> + exit 12
> + exit 12
> + [[ 1 -ne 0 ]]
> + /mtb/save/wx23sm/para_scripts/cver_1.1/bin/perr
> + GROUP=mtb
> + NCP=/u/wx20mi/bin/ncpx
> + SUB=/u/wx23sm/bin/sub_vapor
> + PLOG=/mtb/save/wx23sm/para_scripts/cver_1.1/bin/plog
> + PSUB=/mtb/save/wx23sm/para_scripts/cver_1.1/bin/psub_angu
> + [[ -n  ]]
> + export COMDAY=/ptmp/mgd0sa/rotdatprx
> + export RESUBMIT=YES
> + jn=nodrop2010082906gdasanal
> + grep nodrop2010082906gdasanal failed 
> /mtb/save/mgd0sa/para/prnodrop.runlog
> + /mtb/save/wx23sm/para_scripts/cver_1.1/bin/plog 
> /mtb/save/mgd0sa/para/prnodrop
> .runlog ERROR nodrop2010082906gdasanal failed
>
>
> Something else may be going on, but I have spent quite a bit of time 
> looking.  Any ideas on how to fix this?
>
> Thanks,
> Sim
>
>


More information about the Ncep.list.emc.glopara-support mailing list