[Ncep.hmon] emc_utils and rocoto on wcoss cray

[Bin Liu - NOAA Affiliate]

Dear All,

With tests together with Sam, we now have a temporary solution for this
issue (cannot running HWRF on Luna/Surge through crontab jobs):

Here are the things you need to change (example files on Luna you can copy
over)

First use these module files:

/gpfs/hps3/emc/hwrf/noscrub/Bin.Liu/save/OperH217rtofs/
modulefiles/wcossluna/HWRF/build
/gpfs/hps3/emc/hwrf/noscrub/Bin.Liu/save/OperH217rtofs/
modulefiles/wcossluna/HWRF/run

You also need to change this file:
/gpfs/hps3/emc/hwrf/noscrub/
Bin.Liu/save/OperH217rtofs/ush/hwrf_pre_job.sh.inc

And here is the sample script segment if you want add in your .bashrc file
to be able to use emc-utils and rocoto/1.2.4-RC3 from the login node.

module use /gpfs/hps3/emc/hwrf/noscrub/soft/modulefiles
#module load ruby/1.8.7
#module load rocoto/1.2.2
module load emc-utils
module use /gpfs/hps/usrx/local/emc_rocoto/modulefiles
module load rocoto/1.2.4-RC3

These are due to a recent cray system changes (e.g., removing hps/emc link,
and/or other system change, etc). Will commit them into trunk/branches,
once a permanent fix is tested.

Have a nice long weekend!

Best,

Bin

---
Bin Liu
NOAA/NWS/NCEP/EMC
5830 University Research CT
Cubicle 2026
College Park, MD 20740
Tel: (301)-683-3763
Email: Bin.Liu at noaa.gov



On Thu, Oct 5, 2017 at 11:29 AM, Bin Liu - NOAA Affiliate <bin.liu at noaa.gov>
wrote:

> Dear All,
>
> If you want to run HWRF/HMON jobs by using rocoto on Luna or Surge, after
> sometime yesterday. With suggestions from Sam and tests we did (thanks to
> Sam and Zhan), you need make these changes in your module files:
>
> See my examples here for build and run.
>
> LUNA-llogin1:HWRF> pwd
> /gpfs/hps3/emc/hwrf/noscrub/Bin.Liu/save/AWOwork/
> modulefiles/wcossluna/HWRF
> LUNA-llogin1:HWRF> svn diff
> Index: build
> ===================================================================
> --- build       (revision 5706)
> +++ build       (working copy)
> @@ -64,6 +64,7 @@
>  prepend-path PATH /usrx/local/prod/nco/4.4.4/gnu/sandybridge/bin/
>
>  # Need these for Rocoto:
> -module use /gpfs/hps/emc/hwrf/noscrub/soft/modulefiles
> -module load ruby/1.8.7
> -module load rocoto/1.2.2
> +#module use /gpfs/hps/emc/hwrf/noscrub/soft/modulefiles
> +#module load ruby/1.8.7
> +#module load rocoto/1.2.2
> +module load /gpfs/hps/usrx/local/emc_rocoto/modulefiles/rocoto/1.2.4-RC3
> Index: run
> ===================================================================
> --- run (revision 5706)
> +++ run (working copy)
> @@ -42,9 +42,10 @@
>  prepend-path PATH /usrx/local/prod/nco/4.4.4/gnu/sandybridge/bin/
>
>  # Need these for Rocoto:
> -module use /gpfs/hps/emc/hwrf/noscrub/soft/modulefiles
> -module load ruby/1.8.7
> -module load rocoto/1.2.2
> +#module use /gpfs/hps/emc/hwrf/noscrub/soft/modulefiles
> +#module load ruby/1.8.7
> +#module load rocoto/1.2.2
> +module load /gpfs/hps/usrx/local/emc_rocoto/modulefiles/rocoto/1.2.4-RC3
>
> And if you want use emc-utils (qac qout) and rocoto commands, here is an
> example to load the modules in your .bashrc file (noticing you need take
> out ruby/1.8.7 and replace rocot/1.2.2):
> module use /gpfs/hps3/emc/hwrf/noscrub/soft/modulefiles
> #module load ruby/1.8.7
> #module load rocoto/1.2.2
> module load emc-utils
> module load /gpfs/hps/usrx/local/emc_rocoto/modulefiles/rocoto/1.2.4-RC3
>
> Best Regards,
>
> Bin
>
> P.S, please be reminded that /gpfs/hps/emc now has to be changed into
> /gpfs/hps3/emc.
>
> ---
> Bin Liu
> NOAA/NWS/NCEP/EMC
> 5830 University Research CT
> Cubicle 2026
> College Park, MD 20740
> Tel: (301)-683-3763 <(301)%20683-3763>
> Email: Bin.Liu at noaa.gov
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.lstsrv.ncep.noaa.gov/pipermail/ncep.hmon/attachments/20171006/275d161f/attachment.html